Hi, I have a problem with AudioMoth USB Microphone App because don´t record the configuration.
I flash the firmware of Audiomth 1.1.0 whit AudioMoth-USB-Microphone-1.1.1.bin, the configure it with 256khz sample rate, but dont record the configuration because the in app Bat Record settings apper with default settings =48khz.
Any idea?
...It´s possible don´t work because is an Audiomth 1.1.0?
Thanks!
This works fine for me in Bat Recorder on an Android phone. Have you switched the AudioMoth to CUSTOM or DEFAULT? It will only appear as a USB microphone in those modes.
Is this running on a Windows PC? If so, you will need to select the microphone in the Windows sound input. It's possible that the app still won't be able to determine the correct sample rate. We are shortly releasing the AudioMoth Live App which provides all the same functionality as Bat Recorder but for Windows, Mac and Linux laptops. It automatically detects and switches to AudioMoth USB Microphones at the correct sample rate. We found most of the existing live waveform tools a bit tricky to use, so developed our own.
It should work fine with AudioMoth 1.1.0. Can you share a screenshot of what the AudioMoth USB Microphone App shows when it is connected to your computer. It will show the current configured settings in the top panel. I haven't used Bat Record for a while but you may have to tell it to use a high sample rate. It may not default to the raw sample rate of the device.