I have down loaded the Firmwire & Flash Application & saved these to my computer.(Windows 8), however I any not very techie & have no idea how to open a command window.Having down loaded the above, if I attach the Audio Moth will the computer see it?I had no problems with the initial set up. Help please.Regarding boxes I used a Sistema 200ml box measuring 115 x 90 x 40 mm (h), together with some foam cut to accommodate the Moth with a small hole for the microphone.These are air tight. Iwill use cling film to cover the mic hole.All assistance greatly appreciated.I am hoping to listen for bats.
Hi Julian, I was wondering how the small hole for the micro performed in the field. Did you eventually put cling film on it? Did you have any issues (leaking, puncturing) with it? Many thanks,
Rob
Hi Peter,
Thank you that clarifies all issues.I will deploy the Audio Moth tonight.
Kind regards,
Julian.
PS If any one needs more information regard the case I am using please ask.I also have spare foam.
Hi there,
If you're using your AudioMoth for the first time and simply wish to record on a schedule then flashing the device again isn't necessary. AudioMoths come with stock firmware which works just fine for this application.
Download the config app here: https://www.openacousticdevices.info/config
Then attach your AudioMoth with a USB cable to your computer. Fill out the configuration values in the app and configure the device.
Let me know if you have any more issues,
Peter