Hi everyone,
I have 3 audiomoths with weird issues going on and would appreciate any advice on how to tackle them:
Device 1 & 2 are not recognised by the computer (I've tried both OSX and Windows 10 - two seperate devices). When plugged in with batteries and an SD card, one of them will show both LEDs blink, followed by intermittent flashing on the green LED every 2 seconds, but nothing shows up. The other shows no response. When I try to put them into flash mode, both LEDs blink once upon plugging in, followed by intermittent flashing on the green LED every 2 seconds (on any mode - USB/OFF, custom and default).
Device 3 can be flashed and configured completely fine. When powered on and set to custom, it give the "recording failure" signal with both green and red LEDs flashing - no files produced. When set to default, it will seem to be recording with the red LED flashing, but upon checking the files, multiple 1kb WAV files are produced - mostly every second but with intermittent gaps.
I've tried multiple versions of configuration application, as well as different firmwares - all issues are replicated.
Additional Info:
Batteries used: Eneloop BK-4MCCA4BA rechargable AA SD Card: 64GB Sandisk Extreme UHS Speed Class 3 (A2)
Any help would be appreicated! Thanks